Design and Analysis of Hybrid Vehicle Transmission

Thumbnail Image

Date

2026

Journal Title

Journal ISSN

Volume Title

Publisher

German-Mongolian Institute for Resources and Technology (GMIT)

Abstract

The global automotive industry faces mounting pressure from emissions regulations, rising fuel costs, and environmental awareness. Hybrid electric vehicles (HEVs) represent the most commercially mature transition technology, and at the core of every full hybrid powertrain is a transmission system capable of managing power from two energy sources continuously and efficiently. This thesis presents the complete design and engineering analysis of a hybrid vehicle transmission, with specific focus on the Electrically Controlled Continuously Variable Transmission (e-CVT). The work begins with a comprehensive review and comparison of all five major automotive transmission types - manual, automatic, dual-clutch, conventional CVT, and e-CVT - establishing the e-CVT as the uniquely suitable architecture for hybrid applications. The e-CVT mechanism is then analysed in full depth, including the Willis equation governing planetary gear kinematics, all five operating modes, and power flow analysis. A three-stage systematic design methodology is applied: Stage 1 selects the optimal gear ratio k=2.600 from a comprehensive scoring of all 95 valid designs in the automotive range; Stage 2 confirms the tooth counts Ns=20, Np=16, Nr=52 satisfying all geometric and assembly rules; Stage 3 calculates complete AGMA dimensions and verifies structural integrity using formulas from Myszka, Machines and Mechanisms (4th Ed.), Table 10.3. All gear force and stress calculations are derived from first principles. At m = 3 mm, the Lewis bending stress is 57.5 MPa (sun) and 62.6 MPa (planet) against a limit of 207 MPa, the Hertz contact stress is 389.9 MPa against a limit of 733 MPa, and the contact ratio is 1.528, confirming robust meshing. The extended chapters cover involute tooth mathematics, material selection, manufacturing, kinematics superposition, safety factors, and production vehicle comparison.

Description

Degree: Bachelor of Science in Mechanical Engineering (Bachelor's Thesis). Faculty of Mechanical Engineering, German-Mongolian Institute for Resources and Technology (GMIT). Supervisor 1 / Examiner 1: PhD Kim Young Suk; Supervisor 2 / Examiner 2: Prof. PhD Sungchil Lee.

Keywords

Hybrid electric vehicle (HEV), e-CVT, Planetary gear set, Willis equation, AGMA gear design, Lewis bending stress, Hertz contact stress

Citation

Collections

Endorsement

Review

Supplemented By

Referenced By